Brandon, we have a DS3 that is about the same distance. The circuit goes
directly from one PAT3 to another and the times that we see are consistant
8ms-12ms when pinging from one router to the other.
Hope that helps,
Chad
------------------------------
Chad Skidmore
Director, Data Services
Avista Communications, Inc.
http://www.avistacom.net
-----Original Message-----
From: Brandon Applegate [mailto:brandon@one.net]
Sent: Friday, February 04, 2000 6:20 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] DS3 rtt
We are getting avg. 25 msec on ping tests from the following link:
pa-t3 <---- 600 mile DS3 (clear channel, full) ----> pa-t3
Packet size does not affect our times.
Can anyone give me their $ .02 on this ?? I am mainly concerned with the
delay induced by the circuit itself, as we are able to tweak the router
config on each end.
TIA
--------------------------------------------------
Brandon Applegate, CCNA : Network Administrator
http://www.one.net : brandon@one.net
--------------------------------------------------
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT