On Thu, 15 Jun 2000, Joe McGuckin wrote:
> I could use a sample config showing how to have 28 T1's
> coming in on a DS3.
I have some single cards, and they go like this:
controller t3 slot/0 (I assume you'll have 0 and 1)
t1 1 timeslots 1-24 (or however many you'd like)
t1 1 framing esf
t1 1 linecode b8zs (or ami)
exit
serial slot/0:1
then configure as if it were a normal serial interface...
HTH,
Charles
> The Cisco website is vague on how to do this.
>
> Thanks,
>
> Joe
>
>
>
> --
>
> Joe McGuckin
>
> ViaNet Communications
> 994 San Antonio Road
> Palo Alto, CA 94303
>
> Phone: 650-969-2203
> Cell: 650-207-0372
> Fax: 650-969-2124
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:13 EDT