sample config for PA-MC-2T3 wanted

Next message: Charles Sprickman: "Re: sample config for PA-MC-2T3 wanted"
Previous message: Paolo Bevilacqua: "Re: [nsp] Bootflash"
Next in thread: Charles Sprickman: "Re: sample config for PA-MC-2T3 wanted"
Reply: Charles Sprickman: "Re: sample config for PA-MC-2T3 wanted"
Maybe reply: George Robbins: "Re: sample config for PA-MC-2T3 wanted"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: <A HREF="mailto:cisco-nsp@puck.nether.net?Subject=Re:%20sample%20config%20for%20PA-MC-2T3%20wanted&In-Reply-To=&lt;200006160343.UAA63120@monk.via.net&gt;">[ respond to this message ] [ mail a new topic ]

From: Joe McGuckin (joe@via.net)
Date: Thu Jun 15 2000 - 23:43:34 EDT

I could use a sample config showing how to have 28 T1's
coming in on a DS3.

The Cisco website is vague on how to do this.

Thanks,

Joe

Joe McGuckin

ViaNet Communications 994 San Antonio Road Palo Alto, CA 94303

Phone: 650-969-2203 Cell: 650-207-0372 Fax: 650-969-2124

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:13 EDT