Full support for WIC-2T, WIC-2A/S _is_ present now in 36xx series, but...
You need one of the following NMs for this support:
NM-1FE2W, NM-2FE2W, NM-2W
AFAIK, NM-1E2W, NM-2E2W will _never_ support WIC-2x.
--------------------------------------------------------
Basil (Vasily) Dolmatov, CCIE #5347, CCNP-Security, CCDA
LightCom Corp. http://www.lightcom.ru
> -----Original Message-----
> From: james@wwnet.net [mailto:james@wwnet.net]
> Sent: Friday, July 14, 2000 2:55 AM
> To: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] 3660 vs. WIC-2T
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/re
> lnote/3600ser/rn36007k.html
> says that 12.0(7)XK1 introduces "Full support for the WIC-2T, WIC-2A/S,
> and VWIC (single and dual port) Wan Interface Cards in all Cisco 2600 and
> 3600 platforms"
>
> I tried putting 12.0(7)XK1 on my 3640 with a WIC-2T in one of the NM-2E2W
> and I could never see the interfaces. I moved the WIC-2T to a 2610 and
> everything worked fine.
>
> James
>
>
> On Thu, 13 Jul 2000, Chris Le wrote:
>
> > You are correct. The 3600 NM does not support the WIC-2T. I
> believe the WIC-2T is only for the 2600.
> >
> > Chris
> >
> > At 05:45 PM 7/13/2000, Jeff Aitken wrote:
> > >I'm working with some folks who are trying to get a 3660 to accept a
> > >couple of WIC-2T cards. They've purchased a two of them, along with
> > >a NM-1E2W and put the two WICs in it. With 12.0(7)XK1 and 12.1.2T I
> > >get the same behavior. The router appears to recognize the cards, but
> > >the interfaces don't show up.
> > >
> > >The system seems to be happy with the ethernet port on the NM-1E2W.
> > >But unless there's some magic required to get the serial ports to
> > >materialize, it doesn't seem happy with either WIC. I'm starting to
> > >wonder if there isn't some weird compatibility issue here; perhaps
> > >the NM-1E2W supports the WIC-1T but not the -2T?
> > >
> > >I'm sure I'm missing something simple. Any ideas what it is?
> > >
> > >
> > >--Jeff
> > >
> > >
> > >router#sh ver
> > >Cisco Internetwork Operating System Software
> > >IOS (tm) 3600 Software (C3660-JS-M), Version 12.1(2)T,
> RELEASE SOFTWARE (fc1)
> > >Copyright (c) 1986-2000 by cisco Systems, Inc.
> > >Compiled Tue 16-May-00 19:43 by ccai
> > >Image text-base: 0x60008900, data-base: 0x613B4000
> > >
> > >ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)
> > >ROM: 3600 Software (C3660-IS-M), Version 12.0(7)T, RELEASE
> SOFTWARE (fc2)
> > >
> > >router uptime is 13 minutes
> > >System returned to ROM by reload at 21:24:54 UTC Thu Jul 13 2000
> > >System restarted at 21:26:11 UTC Thu Jul 13 2000
> > >System image file is "flash:c3660-js-mz.121-2.T.bin"
> > >
> > >cisco c3660 (R527x) processor (revision A0) with 59392K/6144K
> bytes of memory.
> > >Processor board ID JAB0343862W
> > >R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
> > >Bridging software.
> > >X.25 software, Version 3.0.0.
> > >SuperLAT software (copyright 1990 by Meridian Technology Corp).
> > >TN3270 Emulation software.
> > >
> > >
> > >3660 Chassis type: ENTERPRISE
> > >1 Ethernet/IEEE 802.3 interface(s)
> > >2 FastEthernet/IEEE 802.3 interface(s)
> > >2 HSSI network interface(s)
> > >DRAM configuration is 64 bits wide with parity disabled.
> > >125K bytes of non-volatile configuration memory.
> > >32768K bytes of processor board System flash (Read/Write)
> > >16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)
> > >
> > >Configuration register is 0x2102
> > >
> > >
> > >router#sh diag
> > >...
> > >Slot 3:
> > > Combo 1E, 2W Port adapter, 3 ports
> > > Port adapter is analyzed
> > > Port adapter insertion time unknown
> > > EEPROM contents at hardware discovery:
> > > Hardware revision 1.2 Board revision E0
> > > Serial number 19312858 Part number 800-01789-05
> > > Test history 0x0 RMA number 00-00-00
> > > EEPROM format version 1
> > > EEPROM contents (hex):
> > > 0x20: 01 37 01 02 01 26 B0 DA 50 06 FD 05 00 00 00 00
> > > 0x30: 70 00 00 00 00 04 07 17 FF FF FF FF FF FF FF FF
> > >
> > > WIC Slot 0:
> > > Serial 2T (12in1)
> > > Hardware revision 1.0 Board revision C0
> > > Serial number 20548259 Part number 800-03181-01
> > > Test history 0x0 RMA number 00-00-00
> > > Connector type PCI
> > > EEPROM format version 1
> > > EEPROM contents (hex):
> > > 0x20: 01 12 01 00 01 39 8A A3 50 0C 6D 01 00 00 00 00
> > > 0x30: 60 00 00 00 00 05 24 00 FF FF FF FF FF FF FF FF
> > >
> > > WIC Slot 1:
> > > Serial 2T (12in1)
> > > Hardware revision 1.0 Board revision B0
> > > Serial number 17154641 Part number 800-03181-01
> > > Test history 0x0 RMA number 00-00-00
> > > Connector type PCI
> > > EEPROM format version 1
> > > EEPROM contents (hex):
> > > 0x20: 01 12 01 00 01 05 C2 51 50 0C 6D 01 00 00 00 00
> > > 0x30: 58 00 00 00 99 12 14 00 FF FF FF FF FF FF FF FF
> > >
> > >
> > >
> > >router#sh ip int bri
> > >Interface IP-Address OK? Method Status
> Protocol
> > >FastEthernet0/0 X.X.X.X YES NVRAM up
> up
> > >FastEthernet0/1 X.X.X.X YES NVRAM up
> up
> > >Hssi1/0 X.X.X.X YES NVRAM up
> up
> > >Hssi2/0 X.X.X.X YES NVRAM up
> up
> > >Ethernet3/0 unassigned YES NVRAM up
> down
> > >
> >
> >
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT