I have a pair of Local Directors connected to a 6500 switch operating in
ASLB mode ie. Dispatched assisted mode.
In order to make it work I have to assign the Virtual address to the real
machine's interface, or that's how the TAC told me to get it working.
However because of that fun prot called ARP NT machines report an IP address
conflict at interface startup after the LD replies to an arp request with
the NT machines secondary IP address. I tried adding a static arp mapping to
the LD, but the age out of the table in about 60 seconds.
Any idea's how to get NT working with LD's ASLB or the ASLB working with NT.
Not forgetting I have Unix requirements as well.
Cheers
...Jon
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT