I am basically doing the same thing. You need a FastEthernet port before
you can do the v-lans on the sub-interface.
I have a 2610 with the standard ethernet port and this is what I ran into.
Randy
At 06:17 PM 11/21/00 -0500, Eric J. Merkel wrote:
>I've got an HP procurve switch which is tied into a cisco 2621 router. Up
>until now I have not had a need to do any VLANS on this switch but I do
>now. My understanding is that I need to use 802.1q and have the routers
>ethernet port on a switch port which does trunking for all the vlans.
>
>I've done this but for some reason when I create an ethernet sub-interface
>it does not allow me to set an encapsulation type. Is there particular
>version of the IOS that I need to do 802.1q encapsulation? Also, when
>doing sub-interfaces, should I have the main ethernet interface with no ip
>on it and have all vlan ip's on sub-interfaces kinda like frame relay?
>
>Sorry I am kinda a newbie to vlans. Any tips or pointers would be much
>appreciated!
>
>
>
>Eric Merkel / MetaLink Technologies, Inc
>~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
>Email: merkel@metalink.net
>Phone: 419-782-3472 or 888-999-8002
>~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:21 EDT