[nsp] i can't ping my own interface

From: Roy Reyes (r.reyes@wesolv.com.ph)
Date: Tue Jan 02 2001 - 20:19:48 EST

   I'm using Cisco 7513 router with Controller E1 interface on the VIP2/50. I
setup two point-to-point E1 link which is terminated on my 7513 E1 controller
and the other end is on the Cisco 3660 Controller E1 module. I limit the
timeslot of the two routers to 1-24 and also enable to use the timeslot 16.
   The problem is when i ping my own serial interface on the serial 3/05/:0
7513 (serial 3/0/5:0 = controller 3/0/5) i'm getting a 0% success but when i
ping all of the interfaces on the 3660 it works fine. Aside from the problem
pinging my own interface i observed everything works fine.

thanks,
roy

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT