Is this an "MC" PA, or a channelized PA?
Forward a "sho contr" blah, blah...
Admittedly, I've very little E1 experience.
More info on your running IOS and specific layer 2 config would be useful.
best,
brian
On Tue, 2 Jan 2001, Roy Reyes wrote:
: I'm using Cisco 7513 router with Controller E1 interface on the VIP2/50. I
:setup two point-to-point E1 link which is terminated on my 7513 E1 controller
:and the other end is on the Cisco 3660 Controller E1 module. I limit the
:timeslot of the two routers to 1-24 and also enable to use the timeslot 16.
: The problem is when i ping my own serial interface on the serial 3/05/:0
:7513 (serial 3/0/5:0 = controller 3/0/5) i'm getting a 0% success but when i
:ping all of the interfaces on the 3660 it works fine. Aside from the problem
:pinging my own interface i observed everything works fine.
:
:thanks,
:roy
:
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT