> I need a low cost means to connect two locations via a DS3. We will be
> bridging, not routing the traffic, so I don't need anything fancy. I would
> like to terminate the DS3 directly onto this device rather than use an
> external DSU. It should have 100Mbit Ethernet on the box.
Look at tiaranetworks.com. You want the unchannelized version of their
DS3 box.
I probably need a disclaimer here: Tiara Networks has not yet provided
me with the obligatory T-shirt. The University does not endorse vendors.
But we do think you should use as little electricity as possible, especially
if you're in California.
-jim warner.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT