Go for cbit. M13 is generally used for channelized DS3 interfaces. i.e. T-1
to T-3.
- Daniel Golding
> -----Original Message-----
> From: Martin Picard [mailto:mpicard@sinc.ca]
> Sent: Wednesday, January 24, 2001 3:15 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] DS-3 Signalling
>
>
> Hi,
>
> In order to provision a DS3 circuit on a GSR, I was asked
> by the telco what signalling I would like to use: M13 or cbit.
>
> Their standard seems to be M13. Anybody can shed light on
> what the differences would be and benefits / disadvantages
> of these signalling methods ?
>
> Which one would be the best ?
>
> tx
> martin
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:26 EDT