How do you know the Cat is sending 1g?
Do a show top on your cat...
Gigabit Ethernet does not max at 1G, even if you wanted it to...
Joel Krauska
Exodus - NPE
408-542-3993
On Sun, 18 Feb 2001, Chris wrote:
> Hi all,
> I have a GSR 12016 GE interface connected to Cat6k, the Cat6k spit out 1Gb
> output, the GSr end is showing only appx 500-600Mb of data. The packets are
> getting ignored and there is no throttles. the mode is full dulpex and auto
> negotiation
> enabled, have you come across any bug associated with this, is there any
> work around.
> I have tried to hard code the duplex setting but did not help,
>
> here is some portion of the show tech:
> GigabitEthernet2/0 is up, line protocol is up
> Hardware is GigMac GigabitEthernet, address is 0002.fc0d.5080 (bia
> 0002.fc0d.5080)
> Internet address is XXXX.XXXX.XXXX.XXXX
> MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, rely 221/255, load 1/255
> Encapsulation ARPA, loopback not set
> Keepalive set (10 sec)
> Full-duplex mode, link type is autonegotiation, media type is LX
> output flow-control is unsupported, input flow-control is off
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input 00:00:01, output 00:00:04, output hang never
> Last clearing of "show interface" counters 00:03:14
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 30 second input rate 609278000 bits/sec, 50372 packets/sec
> 30 second output rate 1000 bits/sec, 3 packets/sec
> 9639080 packets input, 1688509050 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 6374974 input errors, 0 CRC, 0 frame, 0 overrun, 6374974 ignored
> 0 watchdog, 137 multicast, 0 pause input
> 608 packets output, 44743 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 babbles, 0 late collision, 0 deferred
> 0 lost carrier, 0 no carrier, 0 pause output
>
> Thanks all,
> chris
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:29 EDT