I already set it to 3600 as recomended by Mr.Larsen. I will tel you any change.
BTW, where can I find information on how timeout works? when is the counter reset?
Thanks
RafaReta
ICAVE
Kazu Kimura wrote:
> Rafael,
>
> Because there are many sessions active and there are many misses, you
> better set the timeout value shorter as Mr.Larsen described. Default
> value is 86400sec or 24 hours per Cisco manual.
>
> Regards,
> Kazu
>
> On Thu, 01 Mar 2001 19:26:54 -0600
> "Rafael A. Reta Rodriguez" <rafareta@icave.com.mx> wrote:
>
> > Tanks for the reply :-)
> >
> > sh ip nat stat
> > Total active translations: 287 (0 static, 287 dynamic; 287 extended)
> > Outside interfaces:
> > Ethernet0/1, Serial1/0:7
> > Inside interfaces:
> > Ethernet0/0, Serial1/0:3, Serial1/0:10
> > Hits: 145365721 Misses: 3664818
> > Expired translations: 3669419
> > Dynamic mappings:
> > -- Inside Source
> > access-list 1 pool fuera refcount 287
> > pool fuera: netmask 255.255.255.252
> > start 148.206.5.136 end 148.206.5.139
> > type generic, total addresses 4, allocated 1 (25%), misses 3395
> >
> > sh proc mem | inc nat didn't ecognized the "|" so I did a grep to nat and got
> >
> > 73 0 268 35259956 6796 0 0 IP NAT Ager
> >
> > Hope it's what we need
> >
> > RafaReta
> >
> >
> > Kazu Kimura wrote:
> >
> > > What is the result of "sh ip nat stat"?
> > > Also please check "sh proc mem | inc nat (or NAT)".
> > > Maybe it will describe the reason.
> > >
> > > Regards,
> > >
> > > Kazu
> > > On Thu, 01 Mar 2001 18:08:59 -0600
> > > "Rafael A. Reta Rodriguez" <rafareta@icave.com.mx> wrote:
> > >
> > > > Sometimes (a couple of times each day) NAT (PAT) stops translating SMTPservices while translating other services like telnet and HTTP. When thishappens I clear ip nat translation * and every thing works properly.I use a 3640 with IOS 12.0(5)I did a show ip nat translation and got 606 lines of translations reportwith 206 like this:--- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.137 10.119.1.65 --- ---
> > > > --- 148.206.5.138 10.119.16.134 --- ---
> > > > and did a show mem with this header:
> > > > Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
> > > > Processor 60FD9E20 12739040 4548268 8190772 168392 8105984
> > > > I/O 1C00000 4194304 2014528 2179776 2078924 2106652
> > > > What is wrong?
> > > > Why do I keep all this translations alive?
> > > > show ip nat tranalation verbose give me a lot of:
> > > > create 00:08:39, use 00:08:34, left 23:51:25,
> > > > TIA
> > > > RafaReta
> > > > ICAVE
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:30 EDT