Number of LSAs is much more important than number of routers, per se. If you
can keep your number of external routes down, and keep the number of network
LSAs down, so that most of your LSAs are Router LSAs, you can squeeze quite
a few routers into your backbone area.
- Daniel Golding
-----Original Message-----
From: Brian [mailto:bri@sonicboom.org]
Sent: Tuesday, March 06, 2001 11:30 AM
To: Brian; kevin Young; cisco-nsp@puck.nether.net
Subject: Re: [nsp] the max router quantity in ospf backbone area
Here is some backup, see
http://www.cisco.com/cpress/cc/td/cpress/design/ospf/on0407.htm
Bri
----- Original Message -----
From: Brian
To: kevin Young ; cisco-nsp@puck.nether.net
Sent: Tuesday, March 06, 2001 8:17 AM
Subject: Re: [nsp] the max router quantity in ospf backbone area
I seem to remember hearing somewhere that a realistic max was like 50.
Bri
----- Original Message -----
From: kevin Young
To: cisco-nsp@puck.nether.net
Sent: Thursday, March 01, 2001 10:05 PM
Subject: [nsp] the max router quantity in ospf backbone area
hi, gangs
there is a questiion puzzled me long time, in reality production
environment, what 's the real max router quantity in single ospf backbone
area? RFC2329 said that the max is 1600 routers in test environment and 350
routers in reality production environment, is that true? does someone use
ospf in ISP environmrnt?
another question is could MPLS Traffic Engineering span ospf and isis
areas? what's the IOS version.
any reply is appreciated.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:31 EDT