[nsp] Cisco Setup 2621

From: RTS (rts@rdr.net)
Date: Wed Mar 28 2001 - 17:28:00 EST

I am trying to set up a FastEthernet0/1 port on a 2621 router.

I am trying to either set the ip address or use unnumbered.

I have ip on F0/0 as xxx.xxx.xxx.129 255.255.255.192

When I set the F0/1 as xxx.xxx.xxx 130 255.255.255.192 I get the following:
xxx.xxx.xxx.128 overlaps with FastEthernet0/0

When I set the F0/1 as ip unnumbered F0/0 I get the following:
Point-to-point (non-multi-access) interfaces only

What is the problem I am not seeing.

Thanks
Randy

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT