Hi Everybody,
I donot intend to have mulitiple addresses but want
to have real subinterfaces to test an VPN application.
Could anybody give details to how to do with VLAN
trunking?
Pls give a more detailed step-by-step approach to do
it.
Thanx and regards,
Eliz
--- "Wortendyke, Ken" <KWortendyke@Timebridge.com>
wrote:
> What version of IOS are you running?
> Are you trying not to use secondary addresses?
> Trying to clarify the
> application here.
>
> Ken W
>
> -----Original Message-----
> From: eliz linav [mailto:elizlinav@yahoo.com]
> Sent: Friday, June 29, 2001 2:11 PM
> To: cisco-nsp@puck.nether.net
> Subject: subinterfaces on cisco2511
>
>
> Hi all,
> i was trying to configure sub-interface on eth0
> int eth 0.1
> ip add 10.1.1.1 255.255.0.0
> The router says "Configuring IP routing
> on
> a LAN subinterface is only allowed if that
> subinterface is already configured as part of an
> IEEE
> 802.10 or ISL vLAN. "
> I want to create multiple sub-int with ip
> addresses.
> the ethernet 0 is already created and up!
> What does the msg mean?
> thanx, Eliz
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:43 EDT