Yes.
Remember to include the "inpkts enable" flag on a set based switch.
set span {src_mod/src_ports | src_vlan | sc0} dest_mod/dest_port [rx |
tx | both] [inpkts {enable | disable}] [learning {enable | disable}]
[multicast {enable | disable}] [create]
-- steve
--- Devon True <dtrue@xodiax.com> wrote:
> All:
>
> If you setup a SPAN monitor port on a Catalyst switch, can the
> Ethernet
> card on the server have an IP address associated with it for remote
> manageability (i.e. ssh to the server to check logs)? Or do you need
> to
> have two Ethernet cards, one for monitoring and one for remote
> access?
>
> Thanks!
>
> -----
> Devon
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT