Steve,
What about an IOS based switched?
-----
Devon
> -----Original Message-----
> From: Stephen Gill [mailto:gillsr@yahoo.com]
> Sent: Thursday, October 18, 2001 10:08 PM
> To: Devon True; cisco-nsp@puck.nether.net
> Subject: Re: SPAN: Can the monitoring Ethernet card have an IP address
>
>
> Yes.
>
> Remember to include the "inpkts enable" flag on a set based switch.
>
> set span {src_mod/src_ports | src_vlan | sc0} dest_mod/dest_port [rx |
> tx | both] [inpkts {enable | disable}] [learning {enable | disable}]
> [multicast {enable | disable}] [create]
>
>
> -- steve
>
> --- Devon True <dtrue@xodiax.com> wrote:
> > All:
> >
> > If you setup a SPAN monitor port on a Catalyst switch, can the
> > Ethernet
> > card on the server have an IP address associated with it for remote
> > manageability (i.e. ssh to the server to check logs)? Or do you need
> > to
> > have two Ethernet cards, one for monitoring and one for remote
> > access?
> >
> > Thanks!
> >
> > -----
> > Devon
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT