[nsp] WCCP & 12.1(5)T10

• Next message: Ryan O'Connell: "Re: [nsp] 12.2(2)T Service Provider on 3662 w 256MB"
• Previous message: pankaj: "[nsp] Fw: [nsp] Detail OID list of cisco products"
• Next in thread: Lincoln Dale: "Re: [nsp] WCCP & 12.1(5)T10"
• Reply: Lincoln Dale: "Re: [nsp] WCCP & 12.1(5)T10"
• Maybe reply: Mark Pace Balzan: "[nsp] WCCP & 12.1(5)T10"
• Reply: Lincoln Dale: "Re: [nsp] WCCP & 12.1(5)T10"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi All,

Does anyone know of any issues with WCCP v2 and 12.1(5)T10 running on
7206VXR NPE 400 with CEF enabled.

My situation is as follows:

I have an NPE200 and NPE400. When I redirect traffic from the NPE200 toward
the cache, I get around 8Mbps of traffic handled by the cache, which is
reasonable for my customer base, and 14Mbps Internet Link.

When I redirect traffic from the NPE400 which would be about the same amount
of requests, the traffic processed by the cache goes up to around 80Mbps.
This is a crazy figure, and I cannot yet figure out exactly whats happening.

Is their anyone using WCCP v2 and 12.1(5)T10 running on 7206VXR NPE 400 with
CEF enabled for redirection, and is working well ?

Thanks

Mark

• Next message: Ryan O'Connell: "Re: [nsp] 12.2(2)T Service Provider on 3662 w 256MB"
• Previous message: pankaj: "[nsp] Fw: [nsp] Detail OID list of cisco products"
• Next in thread: Lincoln Dale: "Re: [nsp] WCCP & 12.1(5)T10"
• Reply: Lincoln Dale: "Re: [nsp] WCCP & 12.1(5)T10"
• Maybe reply: Mark Pace Balzan: "[nsp] WCCP & 12.1(5)T10"
• Reply: Lincoln Dale: "Re: [nsp] WCCP & 12.1(5)T10"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT