Dear Listmaster,
Sorry for the added volume to the list.
I know it's the holidays and everything, but can we remove this "user"
from this list, obviously he's NOT active!
I'd rather NOT filter this list.
Thank you
On Fri, 26 Dec 1997 MAILER-DAEMON@teleglobe.ca wrote:
> To: ismtp@SMTP@Mail[<cisco-nsp@iagnet.net>]
> Cc:
> Subject: [nsp] Undeliverable Message
>
> Message not delivered to recipients below. Press F1 for help with VNM
> error codes.
>
> VNM3043: Brian Dickson@INET@WAS
>
>
>
> VNM3043 -- MAILBOX IS FULL
>
> The message cannot be delivered because the
> recipient's mailbox contains the maximum number of
> messages, as set by the system administrator. The
> recipient must delete some messages before any
> other messages can be delivered.
> The maximum message limit for a user's mailbox is
> 10,000. The default message limit is 1000 messages.
> Administrators can set message limits using the
> Mailbox Settings function available in the
> Manage User menu (MUSER).
>
> When a user's mailbox reaches the limit, the
> user must delete some of the messages before
> the mailbox can accept any more incoming messages.
>
> ---------------------- Original Message Follows ----------------------
>
> To: ismtp@SMTP@Mail[<cisco-nsp@iagnet.net>]
> Cc:
> Subject: [nsp] Undeliverable Message
>
> Message not delivered to recipients below. Press F1 for help with VNM
> error codes.
>
> VNM3043: Brian Dickson@INET@WAS
>
>
>
> VNM3043 -- MAILBOX IS FULL
>
> The message cannot be delivered because the
> recipient's mailbox contains the maximum number of
> messages, as set by the system administrator. The
> recipient must delete some messages before any
> other messages can be delivered.
> The maximum message limit for a user's mailbox is
> 10,000. The default message limit is 1000 messages.
> Administrators can set message limits using the
> Mailbox Settings function available in the
> Manage User menu (MUSER).
>
> When a user's mailbox reaches the limit, the
> user must delete some of the messages before
> the mailbox can accept any more incoming messages.
>
> ---------------------- Original Message Follows ----------------------
>
> To: ismtp@SMTP@Mail[<cisco-nsp@iagnet.net>]
> Cc:
> Subject: [nsp] Undeliverable Message
>
> Message not delivered to recipients below. Press F1 for help with VNM
> error codes.
>
> VNM3043: Brian Dickson@INET@WAS
>
>
>
> VNM3043 -- MAILBOX IS FULL
>
> The message cannot be delivered because the
> recipient's mailbox contains the maximum number of
> messages, as set by the system administrator. The
> recipient must delete some messages before any
> other messages can be delivered.
> The maximum message limit for a user's mailbox is
> 10,000. The default message limit is 1000 messages.
> Administrators can set message limits using the
> Mailbox Settings function available in the
> Manage User menu (MUSER).
>
> When a user's mailbox reaches the limit, the
> user must delete some of the messages before
> the mailbox can accept any more incoming messages.
>
> ---------------------- Original Message Follows ----------------------
>
> To: ismtp@SMTP@Mail[<cisco-nsp@iagnet.net>]
> Cc:
> Subject: [nsp] Undeliverable Message
>
> Message not delivered to recipients below. Press F1 for help with VNM
> error codes.
>
> VNM3043: Brian Dickson@INET@WAS
>
>
>
> VNM3043 -- MAILBOX IS FULL
>
> The message cannot be delivered because the
> recipient's mailbox contains the maximum number of
> messages, as set by the system administrator. The
> recipient must delete some messages before any
> other messages can be delivered.
> The maximum message limit for a user's mailbox is
> 10,000. The default message limit is 1000 messages.
> Administrators can set message limits using the
> Mailbox Settings function available in the
> Manage User menu (MUSER).
>
> When a user's mailbox reaches the limit, the
> user must delete some of the messages before
> the mailbox can accept any more incoming messages.
>
> ---------------------- Original Message Follows ----------------------
>
> To: ismtp@SMTP@Mail[<cisco-nsp@iagnet.net>]
> Cc:
> Subject: [nsp] Undeliverable Message
>
> Message not delivered to recipients below. Press F1 for help with VNM
> error codes.
>
> VNM3043: Brian Dickson@INET@WAS
>
>
>
> VNM3043 -- MAILBOX IS FULL
>
> The message cannot be delivered because the
> recipient's mailbox contains the maximum number of
> messages, as set by the system administrator. The
> recipient must delete some messages before any
> other messages can be delivered.
> The maximum message limit for a user's mailbox is
> 10,000. The default message limit is 1000 messages.
> Administrators can set message limits using the
> Mailbox Settings function available in the
> Manage User menu (MUSER).
>
> When a user's mailbox reaches the limit, the
> user must delete some of the messages before
> the mailbox can accept any more incoming messages.
>
> ---------------------- Original Message Follows ----------------------
>
> To: ismtp@SMTP@Mail[<cisco-nsp@cic.net>]
> Cc:
> Subject: [nsp] Simple DDR..
>
> Message not delivered to recipients below. Press F1 for help with VNM
> error codes.
>
> VNM3043: Brian Dickson@INET@WAS
>
>
>
> VNM3043 -- MAILBOX IS FULL
>
> The message cannot be delivered because the
> recipient's mailbox contains the maximum number of
> messages, as set by the system administrator. The
> recipient must delete some messages before any
> other messages can be delivered.
> The maximum message limit for a user's mailbox is
> 10,000. The default message limit is 1000 messages.
> Administrators can set message limits using the
> Mailbox Settings function available in the
> Manage User menu (MUSER).
>
> When a user's mailbox reaches the limit, the
> user must delete some of the messages before
> the mailbox can accept any more incoming messages.
>
> ---------------------- Original Message Follows ----------------------
>
>
> Greetings!
>
> I have not been able to meet my simple requirement of DDR..
>
> I have a cisco 2501 which should dial to my service provider terminal
> server ( Livingstion PM) if it detects intereresting packets from any of
> my workstations (line ping,telnet, browser application)
>
> Great if somebody could help me provide the sample config and the
> modem that I should use. I have done lot of reading but so far it did not
> work.
>
> My questions..
>
> 1. Does modem to be used must support v25 bis. It looks most of the
> modems do not support it.
>
> 2. Can sync port of 2501 could be configured to connect modem to it
>
> 3. Looks like aync1 is supported in this box. . My reading says somehow I
> can make use of async1 and aux port to meet my need..
>
> --thanks,
>
> _____________________________________________________________________________
>
> Amrit Mohan Kayastha Voice : 977-1-220773
> Mercantile Communications (P) Ltd. Fax : 977-1-225407
> Darbar Marg, Kathmandu E-mail: amrit@mos.com.np
> Nepal URL : http://www.south-asia.com
<*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*><*>
Len Pikulski lenp@nothinbut.net (609) 222-1514
http://www.nothinbut.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT