Re: [nsp] Is PA-GE supported on 7500 ?

• Next message: Dmitri Kalintsev: "Re: [nsp] get traffic counters on VLANs via SNMP"
• Previous message: David Sinn: "RE: [nsp] Is PA-GE supported on 7500 ?"
• Maybe in reply to: Joe McGuckin: "[nsp] Is PA-GE supported on 7500 ?"
• Next in thread: George Robbins: "Re: [nsp] Is PA-GE supported on 7500 ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

It's not "supported" at all, but will work in a VIP2/40, VIP2/50, VIP4/xx.
Doesn't work in a FEIP 8-), dunno about a FEIP2.

Offically you need to use a GEIP or GEIP+, which is a VIP4 with a PA-GE
variant, the GEIP uses a standard PA-GE, the GEIP+ uses a dual-wide
variant.

Your milage may vary...

                                                George

> From: Joe McGuckin <joe@monk.via.net>
> Date: Thu, 25 Oct 2001 13:29:36 -0700 (PDT)
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Is PA-GE supported on 7500 ?
>
> I know it is on the 7200VXR but I can't find any documentation
> that says that the PA-GE is supported on the 7500.
>
> If it is, which VIP needs to be used ?
>
> Thanks,
>
> Joe
>
>
> --
>
> Joe McGuckin
>
> ViaNet Communications
> 994 San Antonio Road
> Palo Alto, CA 94303
>
> Phone: 650-213-1302
> Cell: 650-207-0372
> Fax: 650-969-2124
>
>

• Next message: Dmitri Kalintsev: "Re: [nsp] get traffic counters on VLANs via SNMP"
• Previous message: David Sinn: "RE: [nsp] Is PA-GE supported on 7500 ?"
• Maybe in reply to: Joe McGuckin: "[nsp] Is PA-GE supported on 7500 ?"
• Next in thread: George Robbins: "Re: [nsp] Is PA-GE supported on 7500 ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT