[j-nsp] OSPF ASBR config in JunOS

From: Markolf Gudjons (eedmgu@eed.ericsson.se)
Date: Sun Nov 18 2001 - 09:50:32 EST

Hello,

how does one go about configuring an M-series router as an autonomous
system boundary router linking two OSPF AS's? I.e., is there a translation
of this Cisco IOS snippet:

router ospf 100
  network 10.1.1.0 0.0.0.255 area 0
  network 10.10.0.0 0.0.0.255 area 1
!
router ospf 200
  network 192.168.10.0 0.0.0.255 area 0

Thanks in advance!

- Markolf

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT