edson, i tried your command on my lab m20. it works. make sure it is a
router with redundant re. and try request routing-engine login re1. and also
try to copy from re1 to re0 to see the same problem happens. but the command
is good. regards, -dave
-----Original Message-----
From: Edson Rogerio Cardoso [mailto:edson.cardoso@gvt.net.br]
Sent: Friday, December 07, 2001 9:48 AM
To: 'juniper-nsp@puck.nether.net'
Subject: Problems copying re0 to re1
All,
I'm having problems trying to copy the config files from re0 to re1
according the orientations below:
user@host> file copy /config/juniper.conf re1:/var/tmp/copied-juniper.conf
I always receive these errors:
error: put-file failed
error: could not send local copy of file.
BTW, the file copy to a FTP is working very well.
Any ideas ???
Edson R. Cardoso
QoS - Quality of Service
Juniper Authorized Trainning Center
www.qos.com.br
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT