Problems copying re0 to re1

From: Edson Rogerio Cardoso (edson.cardoso@gvt.net.br)
Date: Fri Dec 07 2001 - 09:47:44 EST

Next message: Dave Qi: "RE: Problems copying re0 to re1"
Previous message: Guy Davies: "RE: [j-nsp] Cisco equivilant to an M5?"
Next in thread: Dave Qi: "RE: Problems copying re0 to re1"
Reply: Dave Qi: "RE: Problems copying re0 to re1"
Maybe reply: MPuras@solunet.com: "RE: Problems copying re0 to re1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

All,
I'm having problems trying to copy the config files from re0 to re1
according the orientations below:
BM_1014424
user@host> file copy /config/juniper.conf re1:/var/tmp/copied-juniper.conf

I always receive these errors:
error: put-file failed
error: could not send local copy of file.

BTW, the file copy to a FTP is working very well.
Any ideas ???

Edson R. Cardoso
<mailto:ecardoso@qos.com.br> ecardoso@qos.com.br
QoS - Quality of Service
Juniper Authorized Trainning Center
www.qos.com.br <http://www.qos.com.br>

Next message: Dave Qi: "RE: Problems copying re0 to re1"
Previous message: Guy Davies: "RE: [j-nsp] Cisco equivilant to an M5?"
Next in thread: Dave Qi: "RE: Problems copying re0 to re1"
Reply: Dave Qi: "RE: Problems copying re0 to re1"
Maybe reply: MPuras@solunet.com: "RE: Problems copying re0 to re1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT