you have to be root for this command.
At 09:28 AM 12/7/01, Dave Qi wrote:
>"urn:schemas-microsoft-com:office:office" xmlns:w =
>"urn:schemas-microsoft-com:office:word" xmlns:st1 =
>"urn:schemas-microsoft-com:office:smarttags">
> edson, i tried your command on my lab m20. it works. make sure it is
> a router with redundant re. and try request routing-engine login re1. and
> also try to copy from re1 to re0 to see the same problem happens. but the
> command is good. regards, -dave
>-----Original Message-----
>From: Edson Rogerio Cardoso [mailto:edson.cardoso@gvt.net.br]
>Sent: Friday, December 07, 2001 9:48 AM
>To: 'juniper-nsp@puck.nether.net'
>Subject: Problems copying re0 to re1
>
>All,
>I'm having problems trying to copy the config files from re0 to re1
>according the orientations below:
>
>user@host> file copy /config/juniper.conf re1:/var/tmp/copied-juniper.conf
>
>I always receive these errors:
>error: put-file failed
>error: could not send local copy of file.
>
>BTW, the file copy to a FTP is working very well.
>Any ideas ???
>
>Edson R. Cardoso
><mailto:ecardoso@qos.com.br>ecardoso@qos.com.br
>QoS - Quality of Service
>Juniper Authorized Trainning Center
><http://www.qos.com.br>www.qos.com.br
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT