On Sat, Jan 12, 2002 at 09:57:40AM -0500, anthracite blond wrote:
> On Fri, 11 Jan 2002, Matt Mayes wrote:
> > I have lab environment with several cisco and juniper boxes. Does anyone
> > know if there exists a juniper equivalent of cdp? If so, can you point me
> > to some documentation.
> >
>
> If you're using Sonet links, both Cisco and Juniper devices will transmit
> basic device information (hostname, port name and IP address (Cisco only))
> using the path trace field.
>
> Use "show controller" or "show interfaces extensive."
That is ok - but in my experience CDP is mostly usefull when connecting
to a L2 device, as you cannot rely on L3 addresses to do the mapping of
connected interfaces.
/Jesper
-- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: FreeBSD committer @ AS2109 (A much smaller network ;-)One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT