On Sat, Jan 12, 2002 at 09:57:40AM -0500, anthracite blond wrote:
> On Fri, 11 Jan 2002, Matt Mayes wrote:
> > I have lab environment with several cisco and juniper boxes. Does anyone
> > know if there exists a juniper equivalent of cdp? If so, can you point me
> > to some documentation.
> >
>
> If you're using Sonet links, both Cisco and Juniper devices will transmit
> basic device information (hostname, port name and IP address (Cisco only))
> using the path trace field.
>
> Use "show controller" or "show interfaces extensive."
on cisco you should be able to do "sh int pos1/1 detail"
in recent versions.
but if you are using SDH the path trace is much shorter
so watch out as it will not have nearly as much information.
- jared
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT