How you can monitor a policer. I need to know how many packets are in the contract and how many are not. You can use a counter for the term in the filter, but not for the policer.
root@ruteador# set firewall filter prueba policer prueba then ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
discard Discard the packet
forwarding-class Classify packet to forwarding class
loss-priority Classify packet to loss-priority
[edit]
root@ruteador# set firewall filter prueba term 10 then ?
Possible completions:
accept Accept the packet
+ apply-groups Groups from which to inherit configuration data
count Count the packet in the named counter
discard Discard the packet
forwarding-class Classify packet to forwarding class
ipsec-sa Use specified IPSec Security Association
log Log the packet
loss-priority Classify packet to loss-priority
policer Police the packet using the named policer
> reject Reject the packet
routing-instance Provide routing instance
sample Sample the packet
syslog Syslog information about the packet
[edit]
root@ruteador#
*****************************
Sergio G.
Pedra que rola não cria limo.
*****************************
---------------------------------------
Email gratuito do Portal Busca - http://webmail.busca.pt
Mais um serviço do Portal Busca - http://www.busca.pt
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT