Sergio,
It is available via firewall MIB. The policer only counts packets, not
bytes.
Andy
> -----Original Message-----
> From: Sergio Gomes [mailto:sgomes@busca.pt]
> Sent: Friday, February 15, 2002 2:17 PM
> To: juniper-nsp@puck.nether.net
> Cc: Andrew Ramsey
> Subject: Re: [j-nsp] howto monitor the policer
>
>
> Thank you, Andrew. I can collect this using the firwalls MIB,
> isn't it? Is it available in total bytes or bits per second?
> The number of total packets is not too useful. I need to know
> the out of contract rate.
>
> *****************************
> Sergio G.
> Pedra que rola nao cria limo.
> *****************************
>
> ----------- Mensagem Original ------------
> Assunto: RE: [j-nsp] howto monitor the policer
> De: Andrew Ramsey (akramsey@juniper.net)
> Data: 15 Fevereiro [ver cabecalho completo]
> if you show firewall it will be there
>
> Andy
>
> > -----Original Message-----
> > From: Sergio Gomes [mailto:sgomes@busca.pt]
> > Sent: Friday, February 15, 2002 1:25 PM
> > To: juniper-nsp@puck.nether.net
> > Subject: [j-nsp] howto monitor the policer
> >
> >
> > How you can monitor a policer. I need to know how many
> > packets are in the contract and how many are not. You can
> > use a counter for the term in the filter, but not for the policer.
> >
> > root@ruteador# set firewall filter prueba policer prueba then ?
> > Possible completions:
> > + apply-groups Groups from which to inherit configuration data
> > discard Discard the packet
> > forwarding-class Classify packet to forwarding class
> > loss-priority Classify packet to loss-priority
> > [edit]
> >
> > root@ruteador# set firewall filter prueba term 10 then ?
> > Possible completions:
> > accept Accept the packet
> > + apply-groups Groups from which to inherit configuration data
> > count Count the packet in the named counter
> > discard Discard the packet
> > forwarding-class Classify packet to forwarding class
> > ipsec-sa Use specified IPSec Security Association
> > log Log the packet
> > loss-priority Classify packet to loss-priority
> > policer Police the packet using the named policer
> > > reject Reject the packet
> > routing-instance Provide routing instance
> > sample Sample the packet
> > syslog Syslog information about the packet
> > [edit]
> > root@ruteador#
> >
> > *****************************
> > Sergio G.
> > Pedra que rola nao cria limo.
> > *****************************
>
> ---------------------------------------
> Email gratuito do Portal Busca - http://webmail.busca.pt
> Mais um servico do Portal Busca - http://www.busca.pt
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT