Are you using fxp0 to do any routing ?
fxp0 is a management ethernet interface and I don't think that you will be
able to establish an adjacency.
Have you tried doing the same but using other interface ?
German
On Sun, 17 Mar 2002, HHH wrote:
> Having problems with building adjacency between two test Routers. I have authentication running between them, and I had seen authentication failure logs, but I rechecked and retypes the hello-key's but still can't get the adjacency to become stable. It transitions between up and down. Anyone know what the problem could be...can u elaborate more on Designate router mismatch..all router are running at Level 2, and I set the priority for Router-C to 0. Any suggestions?
>
> Mar 17 13:38:50 Received L2 LAN IIH, source id Router-B on fxp0.0
> Mar 17 13:38:50 Designated router mismatch, ours Router-C, remote Router-B
> Mar 17 13:38:50 Adjacency state change, Router-B, state Up -> Down
>
> Thanks
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT