[j-nsp] QoS command for bandwidth

From: Arun (Arun@WSSPL.com)
Date: Wed Mar 27 2002 - 08:09:13 EST

Next message: Jesper Skriver: "Re: [j-nsp] QoS command for bandwidth"
Previous message: HHH: "[j-nsp] RIPv1 and JunOS"
Next in thread: Jesper Skriver: "Re: [j-nsp] QoS command for bandwidth"
Reply: Jesper Skriver: "Re: [j-nsp] QoS command for bandwidth"
Reply: Gert Doering: "Re: [j-nsp] QoS command for bandwidth"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

I need to configure following on juniper router,

All ftp traffic coming from source IP address 1.2.3.4
should be given 5mbps bandwidth on a particular
interface.

Is it possible through "policer" command? i think it configures
the bandwidth-limit which when exceeded, would drop the packets
or re-prioritize it rather than allocating dedicated bandwidth of 5mbps.

Cisco CLI has "bandwidth" command which configures dedicated bandwidth
for the traffic from specific IPaddress, port number, precedence etc.

Please let me know if similar thing is possible with juniper CLI.
An example would help.

Regards,
Arun

Next message: Jesper Skriver: "Re: [j-nsp] QoS command for bandwidth"
Previous message: HHH: "[j-nsp] RIPv1 and JunOS"
Next in thread: Jesper Skriver: "Re: [j-nsp] QoS command for bandwidth"
Reply: Jesper Skriver: "Re: [j-nsp] QoS command for bandwidth"
Reply: Gert Doering: "Re: [j-nsp] QoS command for bandwidth"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT