Re: [j-nsp] QoS command for bandwidth

From: Gert Doering (gert@greenie.muc.de)
Date: Wed Mar 27 2002 - 16:59:24 EST

Next message: David Mallwitz: "Re: M20 vs. M40"
Previous message: Chris Woodfield: "[j-nsp] RIPv2 timers"
In reply to: Arun: "[j-nsp] QoS command for bandwidth"
Next in thread: Blaz Zupan: "Re: [j-nsp] QoS command for bandwidth"
Reply: Blaz Zupan: "Re: [j-nsp] QoS command for bandwidth"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

On Wed, Mar 27, 2002 at 06:39:13PM +0530, Arun wrote:
> Cisco CLI has "bandwidth" command which configures dedicated bandwidth
> for the traffic from specific IPaddress, port number, precedence etc.

Actually, for the sake of documentation, the Cisco "bandwidth" command
does NOT do anything related to policing or traffic shaping.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de

Next message: David Mallwitz: "Re: M20 vs. M40"
Previous message: Chris Woodfield: "[j-nsp] RIPv2 timers"
In reply to: Arun: "[j-nsp] QoS command for bandwidth"
Next in thread: Blaz Zupan: "Re: [j-nsp] QoS command for bandwidth"
Reply: Blaz Zupan: "Re: [j-nsp] QoS command for bandwidth"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT