it is, read the documentation
On Wed, Mar 27, 2002 at 06:39:13PM +0530, Arun wrote:
> Hi,
>
> I need to configure following on juniper router,
>
> All ftp traffic coming from source IP address 1.2.3.4
> should be given 5mbps bandwidth on a particular
> interface.
>
> Is it possible through "policer" command? i think it configures
> the bandwidth-limit which when exceeded, would drop the packets
> or re-prioritize it rather than allocating dedicated bandwidth of 5mbps.
>
>
> Cisco CLI has "bandwidth" command which configures dedicated bandwidth
> for the traffic from specific IPaddress, port number, precedence etc.
>
> Please let me know if similar thing is possible with juniper CLI.
> An example would help.
>
> Regards,
> Arun
>
>
>
>
>
>
>
>
>
>
>
>
>
/Jesper
-- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: FreeBSD committer @ AS2109 (A much smaller network ;-)One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT