Re: problem with pos-interface sdh-framing

• Next message: Fernando Krahe: "RE: problem with pos-interface sdh-framing"
• Previous message: MarcoH: "Re: problem with pos-interface sdh-framing"
• In reply to: MarcoH: "problem with pos-interface sdh-framing"
• Next in thread: Fernando Krahe: "RE: problem with pos-interface sdh-framing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

On Monday 12 March 2001 14:04, MarcoH wrote:

I saw this with 4.1R3, a reboot of the box fixes it (not sure about a FPR
re-seat though). Aparrently its fixed in 4.2+

--
Leigh Porter
C&W
> Hi there,
>
> Has anyone of you got any experience with oc-3 pos interfaces running SDH
> mode ?
>
> We are trying to hook a M40 to a leased stm-1, which only handles
> SDH-framing. On the other side is a cisco 7507, with a pos interface in
> sdh-mode.
>
> As far as I can see, that when we put the juniper in sdh-framing, there are
> no packets transmitted out of the interface. When we use the default sonet
> framing, I see packets coming in on the cisco, but they are all corrupted
> by the transmission equipment in between.
>
> Grtx,
>
> MarcoH
>
> Cistron Internet Services
> Alphen a/d Rijn, The Netherlands.

• Next message: Fernando Krahe: "RE: problem with pos-interface sdh-framing"
• Previous message: MarcoH: "Re: problem with pos-interface sdh-framing"
• In reply to: MarcoH: "problem with pos-interface sdh-framing"
• Next in thread: Fernando Krahe: "RE: problem with pos-interface sdh-framing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT