Actually, I did see it on my routers as possible completion running
'request system software ?' but we've never used it. We
always reload the way I described below. Helps if I read the subject
before replying.
* Thus spake Craig Pierantozzi (tozz@user1.bind.com):
> Rollback is used to rollback to a previously commited config not
> to previously loaded JunOS code.
>
> http://www.juniper.net/techpubs/software/junos41/swconfig-install41/html/cli-summary-configuration-mode15.html
>
> In order to downgrade JunOS you have to reload using
> 'request system software add blahblahblah'
>
> -cp
>
> * Thus spake Andrew Smith (as160@yahoo.com):
>
> > Hi, all
> >
> > I upgraded from 4.3R1 to 4.3R3. I tried to play with
> > this command, however if did not rollback to 4.3R1.
> > Reboot the box as well. There is nothing in the
> > command guide talking about this command. Am I doing
> > something wrong? Any pointers will be great.
> >
> > TIA
> >
> > Andrew
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT