[alcatel-nsp] Alcatel 6400/6850/GPON ISAM questions

[Smith, Anton (Anton)]

Hi ruslan, you can use the XML interface on the ams to connect with your provisioning system I believe.

Regards anton

Sent from my mobile device

On 11 apr 2011, at 08:43, "Ruslan Pustovoitov" <rus-p at mostelekom.net> wrote:

> Hi Adam
> 
> I work with 7342 olt and I-241G-A ont and setup this equipment via TL1 
> and telnet.
> But I spent about three month for self studying.
> The most serious problem with it is large granularity in command prompt 
> and need for using TL1 because all gpon functionality is configured via TL1.
> From telnet session you can configure only shub (internal switch).
> If you will use AMS to hide this complexity you can't setup ont form 
> your own provisioning system.
> If you have a specific questions I will try to aswer.
> 
> 
> Adam Armstrong пишет:
>> On 05/04/2011 21:39, JOHNSON, ALASTAIR (ALASTAIR) wrote:
>>> Hi Adam,
>>> 
>>> There's multiple approaches to ONT provisioning on the GPON 
>>> platforms, typically either pre-provisioning (based on ONT serial 
>>> number) or reactive provisioning (based on the OLT detecting the ONT 
>>> on the network).
>>> 
>>> Once the ONT is provisioned onto the network with location and 
>>> capabilities, you then provision ports and services. The 5520 AMS 
>>> makes all of this relatively straight forward.
>> Forgive me if I trust your opinion on this as much as trust Cisco's 
>> opinion on how good ISC and Ciscoworks is.
>> 
>> I was hoping for real-world experiences from customers :)
>> 
>> adam.
>> _______________________________________________
>> alcatel-nsp mailing list
>> alcatel-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>> 
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp