[a-nsp] 7050SX MPLS ?
Mark Tinka
mark.tinka at seacom.com
Tue Jan 26 01:45:11 EST 2021
On 1/25/21 22:22, Bryan Holloway wrote:
> Yeah, I may not have described this very well ...
>
> ( And thank you to Gert who indicated the same. :) )
>
> Consider a 7050SX (PE) sitting downstream from an ASR9k (P). /30
> between them running IS-IS.
>
> Customer hangs off of a VLAN on the 7050SX. I can turn up MPLS/LDP
> just fine on the 7050 -- talks happily to the ASR -- but then I can't
> push full-payload packets (1500) to customer's VLAN from upstream RRs
> (or from anywhere, for that matter ...) Except from next-hop.
>
> Spun up a vEOS running 4.25.0 and seeing the same behavior, but I
> honestly don't know what hardware it's trying to emulate ... (Thank
> you for that suggestion, Sabri, re: older firmware.)
>
> Hope this better explains things ...
Curious - are you running Jumbo frames on all interfaces on both devices?
Mark.
More information about the arista-nsp
mailing list