Relay needed
Don Buska
d.buska at AAIATE.COM
Tue Apr 8 20:24:12 EDT 1997
On Tue, 8 Apr 1997 13:45:43 -0500, Brian Carling (Radio G3XLQ /
AF4K) wrote:
>Needed - mercury wetted relay for cathode keying tube rigs!
>
>What do you have in the junque boxes out there????
>
>Please e-mail me:
>
>bry at mnsinc.com
>
>Thanks & 73 de AF4K Bry
>********************************************************
>*** 73 from Radio AF4K / G3XLQ in Gaithersburg, MD USA *
>** E-mail to: bry at mnsinc.com *
>*** See the great ham radio resources at: *
>** http://www.mnsinc.com/bry/ *
>********************************************************
Bry,
I checked my junk-box and found a SPDT mercury wetted relay. This
is a 12VDC coil (30mA). I don't have any data on this, but it is
marked GI (General Instruments ?) CLARE HGJM51131N00.
Physical size is 1/2" X 1-1/2" X 5/16" with PCB solder pins. It
must be used vertically per marking on the realy as shown below.
_
! !-
! !
! ! Thus if mounted properly on a PCB the PCB will have to
! ! be vertical. You could always solder wires to the pins
! ! and just mount the relay vertically using double-sided
! ! tape.
! !-
-
If you want it just send me your snail-mail address and I'll pop it
off to you in the mail.
73
Don N9OO
*******************************************************************
** **
** Don Buska N9OO (EN62bo) Principal Engineer **
** d.buska at aaiate.com Advantest America Inc. **
** 4805 64th Ave Buffalo Grove, IL **
** Kenosha, WI 53144 (847)821-3393 **
** (414)654-0072 fax (847)634-2872 **
** **
** ARRL-LM AWA AMI CCA QCWA CSVHFS NTMS **
** **
** Wants: Transmitters by Thordarson, Stancor, UTC and **
** other transformer companies. **
** Receiver: National NC-101XA w/speaker **
** Magazines: 73 Mag's from 1960/61 **
*******************************************************************
More information about the Boatanchors
mailing list