What are specs on BC-610 plate xmfr?

Bob bmiller at CALWEB.COM
Sun Nov 14 17:46:24 EST 1999


Hi Lane,

If the unit is an early 610 with the cast end bell style xfmer, there is
only one primary winding with a tap.  Otherwise, same specs as noted  by
Gary

Bob, KE6F

----- Original Message -----
From: Gary Pewitt <gpewitt at EXECPC.COM>
To: <BOATANCHORS at LISTSERV.TEMPE.GOV>
Sent: Sunday, November 14, 1999 1:33 PM
Subject: Re: What are specs on BC-610 plate xmfr?


> At 09:21 AM 11/14/1999 , Lane Zeitler wrote:
> >Gents,
> >Trying to find the specs for a BC-610 plate xmfr.
> >
> >  Need the primary voltages, secondary voltage and current ratings.
> >
> >  Lane
> >Ku7i
>
>  From my BC-610 manual:
>
> T6 Transformer power: plate type; input 117v, 50 to 60 cyc, single ph 2
wdg
> w/taps to provide
> 5760v ct or 4800v ct, when connected in parallel, and 2880v ct  or 2400 v
> ct when connected in
> series; one output wdg seed 5760v at 321 ma ct or 4800v at 475 ma ct;
> 10,000v rms insulation;
>   HS metal case; 8 7/32" h x 10 23/32" lg x 9 7/32" wd less term.; 6
solder
> lug term. and 3 1/4-20
> screw term on bottom; four 3/8-16 studs on 8 3/4" x 7" mtg/c; B&W part
#10-87C
> Signal Corps part number 2Z9621-205 or 2Z9612.262
>
> Gary Pewitt  N9ZSV/KT  gpewitt at execpc.com
> 6120 W. Calumet Rd. Apt. 204, Milwaukee, WI  53223
> 414 355 8147 home    414 297 4307 work
> Sturgeon's Law "Ninety percent of everything is crap."
>
>




More information about the Boatanchors mailing list