51S-1

[Gary Harmon]

Starting restoration on a Collins 51S-1.  I have a manual on the way but it's
not here yet.

The initial review shows a need for the following parts or information:

1.  The AC power input socket for the rear.  Is it like the KWM-2A?

2.  A scan and email of the AC power input socket circuit off the schematic.

3.  Meter case.  Is it like the KWM-2A?

4.  Tube cover for the VFO.

5.  The front panel overlay is about 75% separated from the front panel but it
needs to come off anyway for some minor panel straightening.  What is the
accepted procedure to remove the panel overlay?  I assume it should be glued
back on after repairs, is that true?

Thanks in advance and 73, gary

=====================
Gary H. Harmon, Jr.
K5JWK
6302 Robin Forest
San Antonio, TX  78239-3218
(210) 657-1549
gharmon at idworld.net
=====================

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html