Duplex Outlets - Fire hazard - TVI

J. Forster jfor at QUIK.COM
Fri May 22 09:35:05 EDT 2009


"Wire Nuts"

-John


> We had (all) aluminum wiring in our house in Houston. The fix there was
> "pigtail" sockets. They had steel pigtails permanently attached to the
> sockets which were, in turn, mated to the aluminum wires with wire nuts,
> those plastic, conical-shaped thingies that electricians use to tie two
> wires together. We lived in that house for 16+ years without any problems,
> and that included a 220 vac line to my amp.
>
> Just a thought,
>
> Bob
> AG5X
>   ----- Original Message -----
>   From: Robert Groh
>   To: BOATANCHORS at LISTS.TEMPE.GOV
>   Sent: Thursday, May 21, 2009 9:06 PM
>   Subject: Re: Duplex Outlets - Fire hazard - TVI
>
>
>   Rick,
>
>   Make sure the replacement outlets are rated for aluminum wiring!  Even
> though your wire has copper coating, at least one of the problems with
> aluminum wiring is the temperature expansion of the wire which is higher
> than copper.
>
>   Darned good catch on your part.  Looks like you are going to be busy!
>
>   73
>   Bob Groh, WA2CKY
>
>
>
>
>   ________________________________
>   From: rick darwicki <n6pe at YAHOO.COM>
>   To: BOATANCHORS at LISTS.TEMPE.GOV
>   Sent: Thursday, May 21, 2009 8:57:25 PM
>   Subject: [BOATANCHORS-TEMPE] Duplex Outlets - Fire hazard - TVI
>
>   FYI,
>
>   My house was built in the 70's and does not have all aluminum wire, but
> it does have copper coated aluminum wire.
>
>   With the recent 6-meter openings I decided to try the SteppIR and Pro
> III out on 6-meters and I was causing some audio RFI on the TV. With the
> DirecTV antenna cable disconnected it was still there. Moving around the
> room changed the level of the RFI.
>
>   I unplugged the DirecTV box from the power strip and plugged it into the
> wall socket. The RFI jumped up about 30 db louder and decreased when I
> wiggled the plug.
>
>   I pulled the duplex outlet out and it had #12 push in wires that were
> noticably arced and apparently were the source of the problem because
> replacing the outlet knocked out any sign of TVI.
>
>   I think is is time to go around the whole house and replace all the
> outlets with the compression type.
>
>
>
>
>   Rick, N6PE
>   ===============================================================
>   Remember, E = M * C^2 was not the entire equation.
>
>   -----------------------------------------------------------
>   This list is a public service of the City of Tempe, Arizona
>   -----------------------------------------------------------
>
>   Subscription control -
> http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
>   To post - BOATANCHORS at LISTS.TEMPE.GOV
>   Archives - http://lists.tempe.gov/archives/BOATANCHORS.html
>
>   -----------------------------------------------------------
>   This list is a public service of the City of Tempe, Arizona
>   -----------------------------------------------------------
>
>   Subscription control -
> http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
>   To post - BOATANCHORS at LISTS.TEMPE.GOV
>   Archives - http://lists.tempe.gov/archives/BOATANCHORS.html
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
> To post - BOATANCHORS at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/BOATANCHORS.html
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html




More information about the Boatanchors mailing list