Gonset speaker replacement

[Bob Jackson]

I've got two that size, both 1-3/4' deep, 3.3 ohms. You can have 1 or both for postage.

Bob AG5X
  ----- Original Message ----- 
  From: Emil Dular 
  To: BOATANCHORS at LISTS.TEMPE.GOV 
  Sent: Thursday, April 22, 2010 8:49 AM
  Subject: Gonset speaker replacement


  I've got Gonset IV with a bad speaker, voice coil is open. It is a 3.2 ohm 3.5 inch square, Gonset part number 152-017.  The size is tough enough to find, but the original has an ALNICO magnet and all the possible modern replacements I can find have the big round ceramic magnets. The problem is that the big new type magnet will not fit.  I don't know who made the speaker for Gonset in 1961 but there is SP-CO-243 printed on the backside of the cone.

  So anybody have a good speaker that will fit and they will sell?

  73 es tnx Emil WD4SCZ


  -----------------------------------------------------------
  This list is a public service of the City of Tempe, Arizona
  -----------------------------------------------------------

  Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
  To post - BOATANCHORS at LISTS.TEMPE.GOV
  Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html