Gonset speaker replacement

[Scott Johnson]

First, try to find a kind sould that has one, second , see if you can find a
Quam replacement, third- if it is worth it to you, have it re-coned.
($20-30)

Scott 

-----Original Message-----
From: Boat Anchor Owners and Collectors List
[mailto:BOATANCHORS at LISTS.TEMPE.GOV] On Behalf Of Emil Dular
Sent: Thursday, April 22, 2010 6:49 AM
To: BOATANCHORS at LISTS.TEMPE.GOV
Subject: [BOATANCHORS-TEMPE] Gonset speaker replacement


I've got Gonset IV with a bad speaker, voice coil is open. It is a 3.2 ohm
3.5 inch square, Gonset part number 152-017.  The size is tough enough to
find, but the original has an ALNICO magnet and all the possible modern
replacements I can find have the big round ceramic magnets. The problem is
that the big new type magnet will not fit.  I don't know who made the
speaker for Gonset in 1961 but there is SP-CO-243 printed on the backside of
the cone.

So anybody have a good speaker that will fit and they will sell?

73 es tnx Emil WD4SCZ


-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control -
http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html