Replacement power cords

[Steve Mulder]

Bob,

allelectronics.com, CAT# LCAC-209, $0.95
mouser.com, part# 562-221001-01, $1.92

Steve Mulder

On 11/27/2010 12:49 PM, Bob Jackson wrote:
> Q1: Does anyone have a source for 2-prong, 120v, polarized power cords used to replace unpolarized ones. That is, plug on one end and bare wire on the other? Plan B is to find the polarized plugs and DIY them with some 16ga striped wire. The project is to "de-shock" such radios as the Halli S-38 that can have a hot chassis under some circumstances.
>
> Q2: While I'm at it, I plan to install either type X or type Y bypass caps in the mains as much to help reduce noise as add'l protection against shock hazard. Does anyone have any G2 on which may be the better approach?
>
> Many thanks and 73 to all,
>
> Bob  AG5X
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
> To post - BOATANCHORS at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/BOATANCHORS.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html