[cisco-bba] IP DSLAM & PPPoE question

[Anastassios Chatzithomaoglou]

Dennis Peng wrote:

> Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> 
>>We are testing some ip dslam equipment and i have some questions.
>>
>>The dslam supports RFC1483 only, so i suppose PPP can be transfered over it 
>>and terminated to another router (PPPoE). The dslam acts like a bridge so 
>>its uplink ethernet interface has to be connected to an ethernet interface 
>>of a bbras.
>>
>>What config do i need in the bbras in order to "recognise" these pppoe 
>>sessions and terminate them locally?
> 
> 
> Something like:
> 
> vpdn enable
> !
> vpdn-group pppoe
>  accept-dialin
>   protocol pppoe
>   virtual-template 1
> !
> int fastethernet0/0
>  pppoe enable

    ^^^^^^^^^^^^
This was the one i was looking for. Thx for the tip Dennis ;-)

> !
> interface virtual-template 1
>  :
>  :
> 
> 
>>Can a 7200/7100 be used for such a 
>>scenario?
> 
> 
> Yes. Or if you don't need as many sessions aa 3600/3700 would also do.
> 
> 
>>From customer's side the dsl cpe supports only RFC1483, so i support a 
>>software PPPoE client is required on client's PC.
> 
> 
> Right.
> 
> Dennis
> 
> 
>>-- 
>>***********************************
>>   Chatzithomaoglou Anastasios
>>Network Design & Operations Center
>>          FORTHnet S.A.
>>      <achatz at forthnet.gr>
>>***********************************
>>
>>
>>_______________________________________________
>>cisco-bba mailing list
>>cisco-bba at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-bba
> 
> 

-- 
***********************************
    Chatzithomaoglou Anastasios
Network Design & Operations Center
           FORTHnet S.A.
       <achatz at forthnet.gr>
***********************************