[cisco-bba] gigabit ethernet help

Sunet Sysadmin sysadmin at sunet.com.au
Wed Aug 8 22:21:50 EDT 2007


Hi all,

we have a cisco 7200 series router and we want to terminate ADSL layer2 
user on gigabit ethernet.
We have GBIC card in the router and we have 1000Base GBIC SX module.
The network connection is as follows

Telstra IGR(telco australia)-----------single mode 
fibre-------------demarcation point data centre ----------------single 
mode  fibre flat SC connector --------------- 7200 series router 
1000Base SX module

The problem is i can't get the interface up and even if i plug/unplug 
the single fibre optic the router dowsn't seems be reacting by showing 
link up or down.

The lights on the Gigabit interface keep flashing  Tx,Rx,link in 
1,2,3,1,2,3 ---- pattern.

any suggestions or any help is very much appreciated.

hadar#show diag
Slot 0:
      I/O Controller Port adapter
      Port adapter is analyzed
      Port adapter insertion time 1d00h ago
      EEPROM contents at hardware discovery:
      Hardware revision 2.1           Board revision B0
      Serial number     21855274      Part number    73-4093-03
      FRU Part Number:  C7200-I/O=

      Test history      0x0           RMA number     00-00-00
      EEPROM format version 1
      EEPROM contents (hex):
        0x20: 01 36 02 01 01 4D 7C 2A 49 0F FD 03 00 00 00 00
        0x30: 58 08 4A 00 00 10 08 00 00 00 FF FF FF FF FF FF

Slot 1:
      Gigabit Ethernet Port adapter, 1 port
      Port adapter is analyzed
      Port adapter insertion time 1d00h ago
      EEPROM contents at hardware discovery:
      Hardware revision 1.0           Board revision A1
      Serial number     22579772      Part number    73-3144-03
      FRU Part Number:  PA-1GE=

      Test history      0x0           RMA number     00-00-00
      EEPROM format version 1
      EEPROM contents (hex):
        0x20: 01 98 01 00 01 58 8A 3C 49 0C 48 03 00 00 00 00
        0x30: 51 02 73 00 00 00 00 00 00 01 FF FF FF FF FF FF

Slot 2:
      Fastethernet (TX-ISL) Port adapter, 2 ports
      Port adapter is analyzed
      Port adapter insertion time 1d00h ago
      EEPROM contents at hardware discovery:
      Hardware revision 2.0           Board revision B0
      Serial number     16412105      Part number    73-2618-03
      FRU Part Number:  PA-2FE-TX=, PA-2FEISL-TX=

      Test history      0x0           RMA number     00-00-00
      EEPROM format version 1
      EEPROM contents (hex):
        0x20: 01 6C 02 00 00 FA 6D C9 49 0A 3A 03 00 00 00 00
        0x30: 58 00 00 00 99 12 29 00 00 00 FF FF FF FF FF 00

hadar#show ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(8)T5,  RELEASE 
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 22-Jun-02 16:20 by ccai
Image text-base: 0x60008940, data-base: 0x6173A000

ROM: System Bootstrap, Version 12.1(20000824:081033) 
[dbeazley-cosmos_e_LATEST 101], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(15)S1, EARLY 
DEPLOYMENT RELEASE SOFTWARE (fc1)

hadar uptime is 1 day, 25 minutes
System returned to ROM by power-on
System image file is "sup-slot0:/c7200-ik9s-mz.122-8.T5.bin"

cisco 7204VXR (NPE300) processor (revision D) with 122880K/40960K



cheers
phani.



More information about the cisco-bba mailing list