[cisco-bba] gigabit ethernet help

[Erich Hohermuth]

Hi Phani,

SX Modules are for MultiMode fibre connections. If you have SingleMode
fibres you need either a LX (1310nm) ~10km or a ZX (1550nm) ~ 40 km
module. Please ask the Telco (Telstra) what they required. 

Regards
	Erich


> Telstra IGR(telco australia)-----------single mode 
> fibre-------------demarcation point data centre ----------------single 
> mode  fibre flat SC connector --------------- 7200 series router 
> 1000Base SX module
> 
> The problem is i can't get the interface up and even if i plug/unplug 
> the single fibre optic the router dowsn't seems be reacting by showing 
> link up or down.
> 
> The lights on the Gigabit interface keep flashing  Tx,Rx,link in 
> 1,2,3,1,2,3 ---- pattern.
> 
> any suggestions or any help is very much appreciated.
> 
> hadar#show diag
> Slot 0:
>       I/O Controller Port adapter
>       Port adapter is analyzed
>       Port adapter insertion time 1d00h ago
>       EEPROM contents at hardware discovery:
>       Hardware revision 2.1           Board revision B0
>       Serial number     21855274      Part number    73-4093-03
>       FRU Part Number:  C7200-I/O=
> 
>       Test history      0x0           RMA number     00-00-00
>       EEPROM format version 1
>       EEPROM contents (hex):
>         0x20: 01 36 02 01 01 4D 7C 2A 49 0F FD 03 00 00 00 00
>         0x30: 58 08 4A 00 00 10 08 00 00 00 FF FF FF FF FF FF
> 
> Slot 1:
>       Gigabit Ethernet Port adapter, 1 port
>       Port adapter is analyzed
>       Port adapter insertion time 1d00h ago
>       EEPROM contents at hardware discovery:
>       Hardware revision 1.0           Board revision A1
>       Serial number     22579772      Part number    73-3144-03
>       FRU Part Number:  PA-1GE=
> 
>       Test history      0x0           RMA number     00-00-00
>       EEPROM format version 1
>       EEPROM contents (hex):
>         0x20: 01 98 01 00 01 58 8A 3C 49 0C 48 03 00 00 00 00
>         0x30: 51 02 73 00 00 00 00 00 00 01 FF FF FF FF FF FF
> 
> Slot 2:
>       Fastethernet (TX-ISL) Port adapter, 2 ports
>       Port adapter is analyzed
>       Port adapter insertion time 1d00h ago
>       EEPROM contents at hardware discovery:
>       Hardware revision 2.0           Board revision B0
>       Serial number     16412105      Part number    73-2618-03
>       FRU Part Number:  PA-2FE-TX=, PA-2FEISL-TX=
> 
>       Test history      0x0           RMA number     00-00-00
>       EEPROM format version 1
>       EEPROM contents (hex):
>         0x20: 01 6C 02 00 00 FA 6D C9 49 0A 3A 03 00 00 00 00
>         0x30: 58 00 00 00 99 12 29 00 00 00 FF FF FF FF FF 00
> 
> hadar#show ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(8)T5,  RELEASE 
> SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Sat 22-Jun-02 16:20 by ccai
> Image text-base: 0x60008940, data-base: 0x6173A000
> 
> ROM: System Bootstrap, Version 12.1(20000824:081033) 
> [dbeazley-cosmos_e_LATEST 101], DEVELOPMENT SOFTWARE
> BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(15)S1, EARLY 
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> 
> hadar uptime is 1 day, 25 minutes
> System returned to ROM by power-on
> System image file is "sup-slot0:/c7200-ik9s-mz.122-8.T5.bin"
> 
> cisco 7204VXR (NPE300) processor (revision D) with 122880K/40960K
> 
> 
> 
> cheers
> phani.
> 
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
-- 
* Erich Hohermuth IP Engineer - SolNet (AS 9044) PGPKEY-46A08FCB *
   * phone: +41 32 517 6220 / sip:9044*463 at inoc-dba.pch.net *