[cisco-bba] about Cisco 7206VXR + PA-A6-OC3SMI

Frank Bulk frnkblk at iname.com
Sat Sep 20 21:08:13 EDT 2008


Mat:

 

I can share a stripped configuration from our own similar system, but I'm
struggling to understand what it is you want to do.  Do you want to do
RFC-1483, PPPoA, or PPPoE?

 

Frank

 

From: cisco-bba-bounces at puck.nether.net
[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Matteo
Sent: Saturday, September 20, 2008 2:28 PM
To: cisco-bba at puck.nether.net
Subject: [cisco-bba] about Cisco 7206VXR + PA-A6-OC3SMI

 

Hello,

 

I have Cisco 7206vxr with NPE-G1 and PA-A6-OC3SMI, I must try to configure
it to terminate some customer by adsl connection..... my atm card is connect
to tlc isp that connect me to my customer and mapped every customer on pvc.
Infact when it terminate activation tell me pvc that I use to configure my
atm card.

 

Now how configure it ?? I found much... as point-to-point interface or
point-to-multipoint interface.... inside sub-inf I found some istruction as
create-on-demand or static pvc....

Now I have much confusion....

 

To authenticate my customer now I use pppoe or dedicated vlan.... but it
connect to my by ethernet by wireless or fiber, now with atm how I doing ??

 

Thank you in advance, king regards

 

Mat

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20080920/0f92a899/attachment.html>


More information about the cisco-bba mailing list