[cisco-bba] Help configuring 2 radius servers in PPPoe
Frank Bulk - iName.com
frnkblk at iname.com
Thu Oct 8 11:52:46 EDT 2009
Do these customers user different Virtual-Templates? If so, I believe you
can assign the radius information in the Virtual-Template, overriding those
set at the global level.
From: cisco-bba-bounces at puck.nether.net
[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Paul Cole
Sent: Thursday, October 08, 2009 5:12 AM
To: cisco-bba at puck.nether.net
Subject: [cisco-bba] Help configuring 2 radius servers in PPPoe
I have a 7206VXR router connected to two radius servers and sending radius
attributes to those servers.
I have already set up the conf as this:
aaa group server radius test
Server aaaa.aaaa.aaaa.aaaa auth-port 1812 acct-port 1813
Server bbbb.bbbb.bbbb.bbbb auth-port 1812 acct-port 1813
Radius-server host aaaa.aaaa.aaaa.aaaa auth-port 1812 acct-port 1813
Radius-server host bbbb.bbbb.bbbb.bbbb auth-port 1812 acct-port 1813
Radius-server key key_for_aaaa
Radius-server key key_for_bbbb
Radius-server vsa send accounting
Radius-server vsa send authentication
Is there any way to link each radius server (aaaa or bbbb) with its key (how
does it work ? does the key being sent to both radius aaaa and bbbb and then
radius checks against its own key ?
Also, I don't want to send to both of them (radius aaa will be for a
specific category of users in a specific vlan and the same goes to radius
bbbb) the same accounting infos as radius aaaa will be receiving different
set of infos than radius bbbb.
How can I achieve this ? Is there any way to send some accounting infos to
radius aaaa only for users in vlan aaaa and accounting infos to radius bbbb
for users in vlan bbbb ?
Thanks for your help.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the cisco-bba