[cisco-nas] fax off-ramp...implementation questions

[jlewis at lewis.org]

Working from the example at 
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a00800b5dcf.html#1032323

a few things are unclear to me.  In the section:
Task 2A: Configuring One or More Inbound MMoIP Dial Peers
Step 3: incoming called number string:

Is this a way to direct faxes to certain destination numbers to various 
dial-peers?  If fax calls are all generally going to be sent to "random" 
long distance numbers, can I just set this to "1" which would match 
pretty much all domestic LD numbers of the format 1-xxx-xxx-xxxx?

Task 2B: Configuring One or More Outbound POTS Dial Peers
Step 2: destination-pattern:
Again, I'm not sure what to set this to (1?) since I won't know in advance 
any of the destination numbers.  I'm just assuming that they'll all be 
domestic LD calls.

Step 3: port voice-port:
This command seems to only accept a single voice-port, i.e. 7/0:1:0.  How 
do I tell the 5400 that all the T1's are to be used for outgoing faxes?  
Configure 28 pots dial-peers?


----------------------------------------------------------------------
 Jon Lewis *jlewis at lewis.org*|  I route
 System Administrator        |  therefore you are
 Atlantic Net                |  
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________