[cisco-nas] Autocommand PAD over ISDN

[bordin at cetrel.lu]

Hello,

I have a problem for a migration of a "old" application Point of Sales.
Before , the terminal async with Zmodem application is connected to a USR 
Robotics chassis in analogue (V32bis) and ISDN ( the application terminal 
is the same : according to the client we put a modem analogue or ISDN 
modem ) and USR Modems were connected to a pad Telematics. Then the call 
is made in X.25 to the application server.

I have AS5400HPX, configured with "resource-pool".
I have succeeded to configure for analog modem ( spe modem + autocommand 
pad )  but not for ISDN modem.
I have tried with vty-async (LAPB-TA) and resource-pool group but It 
doesn't works.
Has someone a idea ?

Thanks a lot.

Best Regards...

Bordin Patrick
Cetrel S.A.
www.cetrel.lu

The config :


resource-pool enable
!
resource-pool group resource Krone
 range port 1/44
!
resource-pool group resource Krone-isdn
 range port 1/58
!
resource-pool profile customer Krone
 limit base-size all
 limit overflow-size 0
 resource Krone speech 
 dnis group Krone
!
resource-pool profile customer Krone-isdn
 limit base-size all
 limit overflow-size 0
 resource Krone-isdn digital 
 dnis group Krone-isdn
!
aaa new-model
!
!
aaa group server tacacs+ XXXXXXXX
aaa


calltracker enable
calltracker history max-size 360
calltracker call-record terse quiet
spe country germany
!
spe call-record modem
!
spe default-firmware spe-firmware-1
no ip source-route
!
!
x29 profile krone 1:0 2:0 3:2 4:6 5:0 6:0 7:0 8:0 9:0 12:0 13:0 14:0 15:0 
16:0 17:0 18:0

vty-async
vty-async virtual-template 1

isdn switch-type primary-net5
!
x25 routing acknowledge local

modemcap entry 
krone:MSC=&F&D2E0s0=0s2=43s3=13s4=10s5=8s15=1s21=0s22=0s23=1s24=1s53=0s29=1s64=0

controller E1 7/3
 pri-group timeslots 1-31
 description ISDN PRI 
!
ip tcp synwait-time 5
ip telnet source-interface Loopback0
ip tftp source-interface Loopback0
ip ssh version 2
ip scp server enable
! 
!
!
!
interface Loopback0
 description Loopback Interface for management
 ip address xxxxxxxxxxxxx 255.255.255.255
!
interface FastEthernet0/0
 description DMZ 
 ip address ccccccccccccccc 255.255.255.0
 ip virtual-reassembly
 no ip route-cache cef
 no ip route-cache
 no ip mroute-cache
 duplex auto
 speed auto
 no cdp enable
!
interface Serial7/3:15
 description ISDN PRI
 no ip address
 encapsulation ppp
 dialer rotary-group 1
 dialer-group 1
 autodetect encapsulation v120 lapb-ta
 no snmp trap link-status
 isdn switch-type primary-net5
 isdn overlap-receiving T302 1500
 isdn incoming-voice modem
 no cdp enable
!
interface Virtual-Template1 
 ip unnumbered Loopback0
 no peer default ip address
 ppp authentication chap
!
interface Group-Async0
 no ip address
 encapsulation slip
 async mode interactive
 group-range 1/00 1/70

dialer dnis group Krone
 number yyyyyyyy
 call-type cas speech
!
dialer dnis group Krone-isdn
 number zzzzzzzz
 call-type cas digital
!
dialer-list 1 protocol ip permit

x25 route ^990101803.* hunt-group FEP xot-keepalive-period 5 
xot-keepalive-tries 3 
!
privilege exec level 0 pad
privilege exec level 0 telnet
privilege exec level 1 enable

line vty 0 4
 access-class 1 in
 logging synchronous level all
 login authentication TAC-CET
 transport preferred none
 transport input ssh
 transport output pad telnet
 escape-character 3
line vty 5 7
 autocommand  pad 990101803 /cud ABRK /profile krone /quiet
 transport input v120 lapb-ta
 transport output pad

line 1/44
 session-timeout 1 
 no flush-at-activation
 authorization exec EMPTY
 login authentication EMPTY
 no modem callout
 modem Dialin
 modem autoconfigure type krone
 autocommand  pad 990101803 /cud ABRK /profile krone /quiet
 transport preferred pad
 transport input all
 transport output pad
 escape-character NONE

line 1/58
 session-timeout 1 
 location libre
 no flush-at-activation
 authorization exec EMPTY
 login authentication EMPTY
 no modem callout
 modem Dialin
 modem autoconfigure type V120
 autocommand  pad 990101803 /cud ABRK /profile krone /quiet
 transport preferred none
 transport input v120 lapb-ta
 transport output all
 escape-character NONE
end

=======================================================================
This electronic message is not binding on its sender nor on Cetrel S.A.
Any use of information of this mail except the use by the addressee
within his or her business relation with Cetrel is strictly forbidden
CETREL S.A. L-2956 Luxembourg; Tel: 00352 35566-1; http://www.cetrel.lu
=======================================================================

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-nas/attachments/20090512/0706e790/attachment.html>